• HRT-R1 Heritage Softail 99 and earlier
• HRT-R1DB Heritage Softail 99 and earlier with the detachable backrest. This is the same bracket as the HRT-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
• HRT-R2 Heritage Softail 2000 - 2002
• HRT-R2DB Heritage Softail 2000 - 2002 with detachable backrest. This is the same bracket as the HRT-R2 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
• HRT-R3 Heritage Softail 2003 and newer
• HRT-R3DB Heritage Softail 2003 and newer with detachable backrest. This is the same bracket as the HRT-R3 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
• ST-R1 This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). The docking posts attach to the front two mounting holes in the fender rail. (6 ¼ “ apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1
• ST-R1HB All Softails with Hardmount Backrest except the 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.
• ST-R1DB All Softails with Detachable Backrest except the 2006 & later FXST, FXSTB and FXSTS , 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB).This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.
• ST-R3HB This model is used on the 2007 and later FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5 5/8” apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1. If the stock backrest is replaced with the detachable backrest use ST-R2DB.
• ST-L1 Not used with factory Heritage saddlebags. See HRT Models. This model is used on all softail models. The docking posts attach to the rear two mounting holes in the fender rail. (9 ¼ “ apart). Turn signals must be relocated off the fender to use all ST-L1 models. Turn signal relocation kits available from Great Bike Gear.
• ST-L1DB All Softails with Detachable Backrest. Will work with Softail Deluxe with Standard Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
• ST-L1HB All Softails with Hardmount Backrest. This is the same bracket as the ST-L1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.
• ST-L1SDDB FLSTN: Softail Deluxe with New Deluxe Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The backrest is not provided and must be purchased seperately.
• ST-R2 This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models. The docking posts
attach to the front two mounting holes in the fender rail. (5 5/8” apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1
• ST-R2HB with Hardmount Backrest This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Hardmount Backrest This is the same bracket as the ST-R2 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.
• ST-R2DB with Detachable Backrest This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Detachable Backrest. This is the same bracket as the ST-R2 but comes with different hardware.
• ST-R3HB This model is used on the 2007 FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5 5/8” apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1. If the stock backrest is replaced with the detachable backrest use ST-R2DB.
• DUC-R1 This models is used on the deuce, all years. This kit is to be used with a Mounting System for "The Deuce" DMS-EB manufactured and sold by Great Bike Gear. The mounting system is a formed chrome plate mounted under the fender rail on the deuce to provide mounting points for the Easy Brackets. The original turn signals remain in the factory location. This model is typicaly used with small to medium saddlebags.
• DNA-R1 Used on all Dyna models 96 to 2005. The docking posts attach to the front existing bolt hole and the turn signal hole after the turn signal is relcated. Turn signals is relocated off the fender to use all DNA models. Turn signal relocation kits available from Great Bike Gear.
• DNA-R1HB with Hard Mount Backrest Used on all Dyna models 96 to 2005 with Hard Mount Backrest. This is the same bracket as the DNA-R1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.
• DNA-L1DB all models 96 to 2005 with detachable backrest. This model is used on all Dyna Models 96 to 2005 with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
• DNA-L1SG FXD: 2005 Dyna Super Glide with Hard Mount Backrest. This is the same bracket as the DNA-L1DB but comes with different bolts.
• DNA-L2 Fits 2006 and later Dynas with or without Hard Mount Backrest except FXDWGI. Turn signals must be relocated off the fender al models. Turn signal relocation kits available from Great Bike Gear.
• DNA-L2DB with Detachable Backrest Fits all 2006 and later Dynas except FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.
• DNA-L3 2FXDWGI Fits 2006 and later FXDWGI with or without Hard Mount Backrest.
• DNA-L3DB with Detachable Backrest Fits all 2006 and later Dynas FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.
• FXR-R1 FXR & FXLR Models (87 and later) . Note: Does not fit FXRP. This model is used on the FXR models. The docking posts attach to the front hole in the fender rail and the turn signal hole after the turn signal is relocated off the fender rail. Note: Turn signals must be relocated off the fender on all FXR models. Great Bike Gear does not currently offer a turn signal relocation kit for this model. This model is typically used with small to medium saddlebags.
• FLH-R1 Older Harley Davidson FLH Models. This model is used on the older FLH models. The docking posts attach to the two mounting holes in the fender rail. Holes must be 7 1/4" center to center.
• SPT-R1S "Slimline" This model is used on all sportsters 94 to 03. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Turn signal relocation kits available from Great Bike Gear.
• SPT-R1 This model is used on all sportsters 94 to 03. Works with or without hard mount backrest. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R1S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. Turn signal relocation kits available from Great Bike Gear.
• SPT-R1S This model is used on all sportsters 94 to 03. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail.This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock.
• SPT-R1SDB This is the same bracket as the SPT-R1S but is used with a Detachable Backrest and comes with longer bolts.
• SPT-R1DB 94 to 03 with Detachable Backrest. This is the same bracket as the SPT-R1 but is used with a Detachable Backrest and comes with longer bolts.
• SPT-R2S "Slimline". This model is used on all sportsters 2004 & later. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Turn Signal Relocation Kits available from GBG.
• SPT-R2 This model is used on all sportsters 2004 & later. Works with or without hard mount backrest. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R2S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. Turn Signal Relocation Kits available from GBG.
• SPT-R2SDB 04 and later with Detachable Backrest. This is the same bracket as the SPT-R2S but is used with a Detachable Backrest and comes with different hardware.
Easy Brackets are an innovative two (2) point docking system that allows the quick and easy installation and removal of saddlebags. Easy Brackets use two (2) existing bolts holes in the fender rail of the motorcycle. By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place. Because we make our Easy Brackets specifically for your motorcycle model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your Indian motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit. All models are sold in sets (both sides) and include all necessary hardware. Backrest not included.
| 
